Coverlight blackout blinds, made to measure

Rated 4.9 out of 5

From $366

$385

Made-to-measure blackout blinds with side tracks, built in our Melbourne factory and shipped Australia-wide. You measure, we make it, you fit it. Enter your window size below to see your price.

Quick quote

Not sure on colour? Order free fabric samples and just cover the $12 shipping.

Upgrade your experience

HOW IT WORKS

How a Coverlight blackout blind gets your room dark

Most blackout blinds stop light coming through the fabric, but they let it in around the edges. That’s why a room with ordinary blockout blinds still has a glow. To block out that light, you have to close the gaps.

Coverlight closes them in three places:

  • Side tracks. Both edges of the fabric run inside aluminium tracks, 45mm wide and 25mm thick, from top to bottom.
  • Headbox. The roller sits inside an aluminium headbox, so there is no open gap above it.
  • Bottom rail. When the blind is fully down, the rail locks into a channel at the base.

The fabric is foam-backed blockout fabric that is PVC-free and lead-free.

See the detail on blockout blinds with side tracks.

MANUAL OR MOTORISED

Manual or motorised, the same blackout blind

Both are blackout blinds with the same side tracks, headbox and fabric. The only difference is how you raise and lower them.

Manual: Spring-operated, with no chains or cords. Raise and lower it by hand and it holds at any height. Available from 300mm wide (400mm wide for drops under 800mm). Read more about our Manual Option.

Motorised: A quiet motor you control with a remote. The rechargeable battery lasts an estimated six months per charge (based on one up and down cycle a day on a blind about 2.4m by 2.4m). Add the Smart Home Hub to use the app, Google Home or Amazon Alexa. Available from 525mm wide and 400mm high. Read more about our Motorised Option.

Sizes, fabric and colours

Every blind is made to your exact measurements. Measure the width and drop in millimetres, using the handy DIY Measuring Guide before placing your order. If you are unsure, our friendly team can guide you through it over the phone.

  • Manual: The minimum width is 300mm (maximum width 3000mm). For drops under 800mm, the minimum width is 400mm. Maximum drop 3000mm.
  • Motorised: The minimum size is 525mm wide with a 400mm drop. Maximum width 4000mm. Maximum drop 3000mm.

The largest motorised sizes depend on the width and drop measurements, and larger blinds are motorised only. Enter your size in the price widget to check. If your size isn’t available online, call 1800 482 777 for a custom quote.

Fabric

The foam-backed blockout fabric is available in 12 colours: Bisque, Dark Grey, White, Thundercloud, Shale, Sepia, Pepper, Light Grey, Egg Shell, Blanched, Mist and Angora.

Frame

The headbox and side tracks are available in Monument, Satin White and Satin Black. You can pair any frame colour with any fabric colour.

Want to see the colours at home first? Order the 12-colour fabric sample pack. Pay only $12 shipping and get it back as a discount on your blind order.

Made in Melbourne, delivered Australia-wide

Coverlight blinds are made to order in our Melbourne factory. Certified Australian Made.

Allow up to 10 business days for manufacturing, plus delivery. Shipping is calculated at checkout from your address and the size of your order, so you can see the cost before you pay. Receive tracking details when your blind is dispatched. Every Coverlight DIY blind comes with a 5-year warranty.

Where people fit them

Many problems solved by the same blind.

Ratings and reviews

4.8
Based on 13 reviews
5
77
77%
4
23
23%
3
0%
2
0%
1
0%

Customer photos and videos

Image #1 from Michelle B.
Image #1 from Katherine McConnell
Image #2 from Katherine McConnell
Image #1 from Antonio Del frari
Image #2 from Antonio Del frari
Image #3 from Antonio Del frari
Image #1 from David S.
Image #1 from Michelle B.

Michelle B.

Grateful that Coverlight offers sizes for our window size and we’re happy that it fits like a glove when we installed it. Installation is of low to medium difficulty but definitely requires 2 person since our window is 2m+ in width. Haven’t really tested its insulation properties yet since it’s still early winter but the blockout property definitely works well with out blockout curtains.

(0) (0)
Image #1 from Katherine McConnell

Katherine McConnell

I love them! It was a bit touch and go with installment but once we had one up the other 2 were fairly easy to install. I love how neat they look, no dangling bits!

(0) (0)
Image #2 from Katherine McConnell

Katherine McConnell

I love them! It was a bit touch and go with installment but once we had one up the other 2 were fairly easy to install. I love how neat they look, no dangling bits!

(0) (0)
Image #1 from Antonio Del frari

Antonio Del frari

only problem that was damaged on one of the products but you can not see it was install

(1) (0)
Image #2 from Antonio Del frari

Antonio Del frari

only problem that was damaged on one of the products but you can not see it was install

(1) (0)
Image #3 from Antonio Del frari

Antonio Del frari

only problem that was damaged on one of the products but you can not see it was install

(1) (0)
Image #1 from David S.

David S.

The blind was made and delivered very fast even though i ordered it just before Christmas. The installation was quick and easy with no issues. Programming took me a little longer as I didn’t read the instructions correctly but after watching a quick YouTube video of how to program the opening and closing positions it was done in seconds. They fit and look great so I have ordered 3 more for the rest of the bedrooms

(2) (0)
Image #1 from Michelle B.
Image #1 from Katherine McConnell
Image #2 from Katherine McConnell
Image #1 from Antonio Del frari
Image #2 from Antonio Del frari
Image #3 from Antonio Del frari
Image #1 from David S.
With media
1-5 of 13 reviews
  1. MB

    Grateful that Coverlight offers sizes for our window size and we’re happy that it fits like a glove when we installed it. Installation is of low to medium difficulty but definitely requires 2 person since our window is 2m+ in width. Haven’t really tested its insulation properties yet since it’s still early winter but the blockout property definitely works well with out blockout curtains.

    Image #1 from Michelle B.
    (0) (0)
  2. CB

    Blind seals out the light perfectly, the expanding foam seals any gaps from non-square window frames

    (0) (0)
  3. S

    Excellent quality, straightforward to install

    (0) (0)
  4. KM

    I love them!
    It was a bit touch and go with installment but once we had one up the other 2 were fairly easy to install.
    I love how neat they look, no dangling bits!

    Image #1 from Katherine McConnell
    Image #2 from Katherine McConnell
    (0) (0)
  5. NG

    Great product easy to install all as advertised

    (1) (0)
MEASURING & INSTALLING

Easy to measure and install

You need a tape measure, a power drill and a phillips head screwdriver. Our guides cover the rest.

Coverlight Motorised Blackout Blinds

Measure it yourself

Measure the width and height at three points and use the smallest measurement. The measuring guide shows you where to measure, step by step.

Three Coverlight blackout blinds installed in a room with a wall-mounted television

Free phone consultation

Tricky window, or not sure which fit suits it? Talk it through with our team before you order.

Blackout Blinds Australia

Install it yourself

Screw the headbox and tracks to the frame or architrave, then fit the roll into the headbox. There’s a step-by-step guide for each fit type, with short videos.

Face fit or recess fit? A face fit, mounted on the architrave around the window, generally gives the best light seal. A recess fit sits inside the window opening for a flush look, and we supply expanding foam to seal the gaps around the frame. A recess fit needs 65mm clear at the top and 25mm at the bottom (overroll).

Fitting over a sliding door or a doorway? Ask us before you order.

Frequently asked questions

Will my room be completely dark?
A correctly measured and installed Coverlight blind is designed to create an exceptional room-darkening experience by blocking light from passing through the fabric and around the sides. While we aim for the highest level of light reduction, factors like installation, window squareness, and surface texture can influence the final result.
Face Fit: Mounting the blind on the face of the window architrave generally provides the best possible light seal.
Recess Fit: Mounting the blind inside the window recess provides a sleeker look. For recess fits, we provide special expanding foam which, when installed correctly, is designed to seal light gaps around the frame.
Yes, the Coverlight system is designed for DIY installation. Please refer to our detailed Assembly and Installation guides for step-by-step instructions.

Spring System: The minimum width is 300mm (with a minimum drop of 800mm) or 400mm wide for drops under 800mm.

Motorised System: The minimum size is 525mm wide by 400mm high. Please contact us for maximum size specifications.

Coverlight blackout blinds are compatible with most standard window types found in Australian homes, including:

  • Fixed windows (windows that don’t open): These are the simplest installation, as there are no handles or mechanisms to work around.
  • Sliding windows: Horizontal sliding windows work well with Coverlight, as the blind sits in front of the glass and doesn’t interfere with the sliding mechanism.
  • Double-hung windows (windows that slide up and down): Coverlight can be installed on the inside or outside of the frame.
  • Awning windows (windows that hinge at the top and open outward): Coverlight works with these, provided the blind is mounted to allow the window to open freely behind it.
  • Casement windows (side-hinged windows that swing open): Compatible with Coverlight when using a face fit that allows clearance for the window to open.
  • Bay windows: Each panel of a bay window can be fitted individually, but the angles will require extra posts. Contact our team for support.

Windows that may need special consideration:

  • Skylights: Coverlight is designed for vertical windows and is not currently suitable for skylights or angled roof windows.
  • Arched or shaped windows: Non-rectangular windows are not compatible with the side-track system.

If your window type isn’t listed above, contact our friendly team and we’ll advise whether Coverlight is suitable for your specific setup.

Yes. All our blinds are proudly designed and manufactured in our factory in Melbourne, Victoria.
For child safety and a clean, modern aesthetic, we offer two operating systems:
Soft-Touch Spring: A manually operated spring that holds its position at any point.
Motorised: A quiet 12V DC motor operated by remote control.
We do not offer any chain-operated systems.

With normal use, a single charge will deliver an impressive 6 months* of battery life, removing operational interruptions and the need for frequent charging, for “set and forget” convenience.

*The quoted 6-month average battery life for the motor assumes typical usage, which generally involves 1 up-down cycle a day. This estimate is also based on a standard blind size of approximately 2.4 metres by 2.4 metres. To help maintain the motor’s battery health, it’s recommended to charge it at least every six months.

Absolutely. The fabric is lead-free and PVC-free, and has achieved Greengard Gold and Oeko-Tex certification, ensuring it is free from harmful substances and safe for sensitive environments.

More questions? See all Coverlight DIY FAQs.

See your price in a couple of minutes

Measure your window, enter the width and drop, and choose manual or motorised. Not ready yet? Order free fabric samples first.

0
0
Your Cart
Your cart is emptyReturn to Shop